[rustynutz]

Not much of a dealer if they can't find the part number themselves....

[rustynutz]

Is this any help? 

[Hman]

Based on that, it seems the number DCSY suggested is correct. That also confirms that the dealer that I was talking to is useless!

Can anyone confirm the number based on what they put in their car? I think I'll just buy this part number. Thanks guys!

[DCSY]

Based on that, it seems the number DCSY suggested is correct. That also confirms that the dealer that I was talking to is useless!

Can anyone confirm the number based on what they put in their car? I think I'll just buy this part number. Thanks guys!

If you wanna give the Ryde motor group parts a call, they quoted me 50 dollars or so for the wiring. gonna grab it off them the next time im there.

[Ugly Mongrel]

Have a look at this thread. I posted a list of part numbers and which wiring loom needed to do the job.

https://www.i30ownersclub.com/forum/index.php?topic=10444.msg117783#msg117783

[DCSY]

Took my car in for a service, dropped by the parts store, they had z 2l500 loom in stock, bought it.

[Dazzler]

Took my car in for a service, dropped by the parts store, they had z 2l500 loom in stock, bought it.

[DCSY]

all I need now is the weather to get better, money for the switch itself, and time to do it.

side note: where is the best place to get the switch?

[DCSY]

Got the install done over the weekend, however, does not work with my pioneer headunit as of yet. It lights up fine so i assume it is working fine.. That may be due to me having the wrong patch lead (the one i have is also a 3.5mm plug however for an alpine unit). I have a new one coming in the mail.










PS. i bought mine from 'jayongmall' or something on ebay.

[DCSY]

after purchasing the correct stalk lead for my current head unit, all is working!

[rustynutz]

Yay! 

[Hman]

I am stuck at step 12 & 13.

Step 12: I have loosened the 2 screws but can't get them out. Are they supposed to come out?

Step 13: I can't get the air bag unit off but I assume this is because of my issue in step 12?

EDIT I have read the post on page 2 about these steps but I can't get it off. I am loosening the screws while trying to pull off airbag cover but can't get it off.

[Hman]

I tried it again a week later and it came off straight away.

It was so easy and fast to do this.
Thanks for the instructions guys!