i30 Owners Club
THE GARAGE (SERVICE, MAINTENANCE & REPAIR) => PETROL => Topic started by: seeds on October 26, 2021, 05:00:33
-
CAN ANY ONE TELL ME HOW TO CHANGE DRIVE BELTS ON MY I30 FD 2011 2.0L PETROL HATCHBACK
-
Is is relatively easy even for inexperienced with the "Manuel" at hand. PM me if you need one. Will need your email. In essense loosen the pulley, then the tightening bolt and belt will come off. Check pulleys for play and noises. Re install in reverse order. Belt tightening : approx 1.5 cm play in the middle ( do not remember exactly but manual has the specs).