i30 Owners Club

MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: b15hop40k on July 30, 2018, 13:28:57

Title: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on July 30, 2018, 13:28:57
Hi all,

I have just bought a Kenwood DDX-9018DABS from supercheap auto for $880 on sale.

I have just got the steering wheel control to work. turns out that the kin out on Nav unit  is different for the aerpro CHHY8C just pin 4 needed to be move to pin 5.


and the audio pins need to move too  :( so much for a plug and play kit

the next job is to get the oem  backup camera to work


here are some of the photos of the
 
(https://preview.ibb.co/ep45Oo/IMG_0479.jpg) (https://ibb.co/j5QZG8)

(https://preview.ibb.co/dgiApT/IMG_0495.jpg) (https://ibb.co/kGyzio)

(https://preview.ibb.co/dTibUT/IMG_0494.jpg) (https://ibb.co/jsn39T)

(https://preview.ibb.co/j3jTb8/IMG_0497.jpg) (https://ibb.co/nOMVpT)

(https://preview.ibb.co/gKcEG8/IMG_0489.jpg) (https://ibb.co/cgqZG8)

(https://preview.ibb.co/iBaJb8/IMG_0498.jpg) (https://ibb.co/dmWrw8)
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: CraigB on July 30, 2018, 13:58:45
Looks good :goodjob:

Looks like Aerpro sent you the kit for the GD 1 and 2 where you would have required the GD 3 kit, I believe they all have a slightly different kits and with further slight variations for NAV unit upgrades, it's quite a mine field to work through but you did well to rectify that hurdle :goodjob2:
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: Dazzler on July 30, 2018, 22:32:02
Thanks for the photos! Nice upgrade!  :victory:
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on July 31, 2018, 00:29:33
Hi
Looks good :goodjob:

Looks like Aerpro sent you the kit for the GD 1 and 2 where you would have required the GD 3 kit, I believe they all have a slightly different kits and with further slight variations for NAV unit upgrades, it's quite a mine field to work through but you did well to rectify that hurdle :goodjob2:

Yar on the Aerpro website there is only one kit. and for the Facia Kit no one in Australia stock it or could get it. i had to order it from the US
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on July 31, 2018, 11:26:43
Update.

Turns out the wiring maps for the speakers were complete difficulty to the wire map on here. and all also got to Retention OEM fold out camera too. :crazy1:

Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: Dazzler on July 31, 2018, 11:35:04
Update.

Turns out the wiring maps for the speakers were complete difficulty to the wire map on here. and all also got to Retention OEM fold out camera too. :crazy1:

Umm... Did you mean to say...

Turns out the wiring maps for the speakers were completely different to the wire map on here? (not sure about the other bit)  :undecided:

I'm guessing you had to allocate a different pin/wire to get the camera working??  :cool:
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on July 31, 2018, 12:44:21
Yar, The camera just need to be power and a video signal. The 3rd plug with 4 wires in pin 10,12,22,24. 2 are power and 2 for video. at this stage it was a just a test to get it working went my new jack. I will do a full write up. with parts and photos and the way I write mine up.
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: Dazzler on July 31, 2018, 13:30:46
Ok thanks.   :goodjob2: :goodjob:
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on August 06, 2018, 05:10:24
Job Done.

the OEM fold out camera is working fine. for about $30 to get working.   


(Video) Pin 24 is Black/ ground wire for RCA yellow
(Video) Pin 12 is positive for RCA Yellow
(Power) Pin 10 is positive for the camera
(Power) Pin 22 is Black/Ground for camera
Note the camera is 6V so you will a DC to DC step down aka 12v in 6v out 

also have a look at the following post

 :link: Swapping out a i30 Navigation unit for GD-03 unit (https://www.i30ownersclub.com/forum/index.php?topic=47126.0#quickreply)


I'm using a DC-DC Buck Module 3-40V In / 1.5-35V Out from  :link: Z6334 DC-DC Buck Module 3-40V In / 1.5-35V Out - Altronics (https://www.altronics.com.au/p/z6334-dc-dc-buck-module-3-40v-input/)

And the plug you will need is a TE Connectivity MULTILOCK 025, 2.2mm Pitch, 24 Way, 2 Row Female Right Angle PCB Header
I got mine from RS and the stock number is 712-1274



(https://preview.ibb.co/bwEvke/IMG_0504.jpg) (https://ibb.co/iG3o5e)

(https://preview.ibb.co/gtJzBK/IMG_0505.jpg) (https://ibb.co/kknsWK)

(https://preview.ibb.co/bUdMQe/IMG_0506.jpg) (https://ibb.co/cVN4dz)

(https://preview.ibb.co/iCGxyz/IMG_0503.jpg) (https://ibb.co/dwuT5e)

(https://preview.ibb.co/fvj6rK/IMG_0507.jpg) (https://ibb.co/dN8XWK)

(https://preview.ibb.co/garVJz/IMG_0508.jpg) (https://ibb.co/enq1Qe)

ammonium sulfate molecular mass (https://aluminumsulfate.net/ammonium-sulfate)

(https://preview.ibb.co/k5NbrK/IMG_0502.jpg) (https://ibb.co/jSnnyz)

(https://preview.ibb.co/eiQwrK/IMG_0500.jpg) (https://ibb.co/gA1Edz)

(https://preview.ibb.co/cmCWQe/IMG_0501.jpg) (https://ibb.co/hYRrQe)
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: Dazzler on August 06, 2018, 08:35:16
Excellent. Thanks for the details and the photos.. I'll sticky this post to help others going forward (stop it getting lost)  :cool:
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on August 08, 2018, 07:18:23
Part 2.

the kenwood KSC-PSW8 sub and amp. i would highly recommend it. as it goes under the front seat
(https://preview.ibb.co/eM2TbK/IMG_0509.jpg) (https://ibb.co/gud1wK)

here are some photos for remove the grove box
(https://preview.ibb.co/fq0QOz/IMG_0510.jpg) (https://ibb.co/gObziz)

(https://preview.ibb.co/dfbMwK/IMG_0511.jpg) (https://ibb.co/k78C3z)

(https://preview.ibb.co/k2pkOz/IMG_0514.jpg) (https://ibb.co/cZHuGK)

(https://preview.ibb.co/m7deiz/IMG_0512.jpg) (https://ibb.co/ciMMwK)

(https://preview.ibb.co/mHeVqe/IMG_0513.jpg) (https://ibb.co/cdxGVe)

(https://preview.ibb.co/k84kOz/IMG_0515.jpg) (https://ibb.co/jNmziz)

(https://preview.ibb.co/fReKiz/IMG_0517.jpg) (https://ibb.co/et4kOz)

(https://preview.ibb.co/eHzwVe/IMG_0523.jpg) (https://ibb.co/njWobK)

(https://preview.ibb.co/dvBX3z/IMG_0519.jpg) (https://ibb.co/iKGziz)

(https://preview.ibb.co/gmVpGK/IMG_0524.jpg) (https://ibb.co/hoDWVe)

(https://preview.ibb.co/gTApGK/IMG_0520.jpg) (https://ibb.co/ncoLOz)

(https://preview.ibb.co/ddDWVe/IMG_0522.jpg) (https://ibb.co/ins3bK)

(https://preview.ibb.co/n373bK/IMG_0525.jpg) (https://ibb.co/bzXEiz)

(https://preview.ibb.co/gKzuiz/IMG_0526.jpg) (https://ibb.co/fefObK)

Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: CraigB on August 08, 2018, 08:49:26
If I end up doing a sub I'll be doing similar in Kenwwood or Alpine, that Kenwood looks a bit thinner so might be a better fit :goodjob2:

I hope you didn't pay that price tag...they're $299 in shops here and online.
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: b15hop40k on August 08, 2018, 10:26:03
If I end up doing a sub I'll be doing similar in Kenwwood or Alpine, that Kenwood looks a bit thinner so might be a better fit :goodjob2:

I hope you didn't pay that price tag...they're $299 in shops here and online.


I pay $330 sale price which is not to bad and a 5 mins trap to pick it up. Or $310 with shipping.

The install take me about 3 hours put in. and you will need to remove the dust extractor under the seat to make it fit. Also there good ground point near the grove box. and you will need a set of RCA cables. I also wrapped the cables which help went running the cables. To get the cable to the battery there a grommet under the carpet on the passenger side. which I used or will need to drill a hole.


Sound way is great just enough to you give bass without going overboard
Title: Re: Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS
Post by: CraigB on August 08, 2018, 11:50:44
If I get a sub I’ll have it fitted by Alberts who did my Morel speaker install, if I wait till their old stock 70% off sale then the sub including install will be somewhere around $350, with my back I wouldn’t want to play around under the dash and seat for to long  :sweating:

Those dust extractors under the seat as you call them are actually the rear air vent outlets, put the feet setting on your fan and you’ll feel air coming out of them :)
SimplePortal 2.3.5 © 2008-2012, SimplePortal