i30 Owners Club
GOT PROBLEMS OR ISSUES? => GENERAL => Topic started by: jonnyplantpot on October 25, 2018, 18:21:41
-
Hello,
No a problem with my car as such but it’s a bit weird....
So I’ve got one of those tyre inflators that plugs into the cigarette lighter. I’ve had it about 10 years. I got it as I owned a Kia Sorento and didn’t fancy inflating one of the tyres using a foot pump. A few months ago I swap for an i30 tourer 66 plate. It has those pressure sensors on it somewhere, so the car can tell you when they pressure is low - which it did. So, I went to inflate it. The pump worked fine but there was no pressure reading on the display, annoying but not the end of the world. Anyway I just assumed it was a bit broke and moved on.
Then I went to inflate the tyre on my sons car, an i30 2010 plate and there was the tyre pressure on the display. After a bit of messing around, it appears to be a feature of my car.
Has anyone experienced this / any idea what’s causing it? There doesn’t appear to be anything wrong with the car. I was going to get another one at some point, so it’s not the end of the world if no-one knows the answer.
Thanks, Jon
-
If you are referring to the car display not showing the new pressure - it won't - until you drive the car for a few minutes.
-
No,
It’s the display on the tyre inflator I’m referring too.
It’s not an issue with the car, it just really confusing me.
Jon
-
I can only guess that the mating of the inflation connection is somehow different enough to cause the discrepancy. Do you have detail of the inflator you are using?
-
Not sure if these two picture will tell you anything, but it’s about all the info I can get off it.
If there’s something specific I can get from somewhere I’m happy to give it a try.
Thanks.
(https://preview.ibb.co/jq3NTV/AB478405-CF53-40-D7-A01-D-7-B97-A6479-CF2.jpg) (https://ibb.co/faRboV)
(https://preview.ibb.co/gZee8V/BF9-C333-E-6-FE7-4322-824-C-A342-F4556-CB7.jpg) (https://ibb.co/f9m4aA)
-
The pressure sensing valves must have a different stem design.
-
Ok, thanks.
I might see if I can borrow one, just to try out a different valve.