[chris_i30gd]

I recently changed oil in my i30 diesel 1.4 crdi 2013 model and I added  liqui moly ceramic  additive.
This one: Liqui Moly Ceratec Engine Oil Additive Ceramic Wear Protection 3721 5 pack | eBay


After 500km of use and a short 200km trip that  I have done today
the  temperature was  1 line under 90C degrees and has 5 lines in gauge when I arrived.



I forgot If I had 5 or 6 lines temperature before. Can you inform me your temp gauge info

Thanks!

[Shambles]

Mine is always 5 bars when hot.

[chris_i30gd]

yes - so its 5 bars the normal ok thanks!

5 Bars in dash, 87-94 C on Eobd while driving

[mickd]

Oil temp should be about the same as engine temp - 90 deg C.
Most thermostat 's are 90 deg C.
Yes /No ?

Typically my engine oil temp. is 10-15 C lower than coolant when at speed after 40-50 Km of driving (15-20 C outside temp)

[chris_i30gd]

By the way liqui moly oil + ceramic additive has reduced the diesel engine noise. It sounds almost like petrol

[The Gonz]

I'm attracted to reducing the Diesel clackers but the temperature detail is unclear to an FD driver. Did the additive change the temperature?

[chris_i30gd]

I haven't measure the Temperature of engine and oil.
But the engine noise is reduced and I can hear it working better.

Also if you search online for reviews about this company's additive products
they have great reviews for all.