[tw2005]

Excuse me if I've got the terminology wrong but I've hit a snag working on a suspension changeover.

I've got a workshop manual but don't see this shown. Shows all the arms etc

There's 4 bolts, 19mm socket, not sure if it's M12 bolt.

I can confirm they're in the  "geez they're bloody tight"  region getting them off so I'm thinking 150-180Nm .

[tw2005]

In the Suspension System, General Info, Specifications.

I found Sub frame to body bolts and nuts 160 ~ 180 Nm. I'm running with that figure for the rear