i30 Owners Club

MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: aanastasiou4 on February 23, 2018, 17:04:43

Title: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 23, 2018, 17:04:43
Today I finally took the risk to replace the traditional instrument cluster with the newer supervision one! I bought it from autoparts24.co.uk. The swap was plug and play and extremely easy, there are just 8 screws to be removed. The only problems are that the new cluster reads much less km that my car actually has since it has been removed from a newer salvage car and the seat belt warning is not as loud as the old cluster. It is a lot more ‘cleaner’ and also has some more modern sound effects compared to the old one. It also has a car service reminder. I don’t have any pictures of the swapping process but I have the finished product!
If anyone is interested in the process I can happily explain step by step. I have also ordered a gd-02 headunit to replace the standard one. Still waiting for that!
Original cluster
(https://uploads.tapatalk-cdn.com/20180223/90361fe4cd850a09578ba5df55d781f1.jpg)

Supervision cluster
(https://uploads.tapatalk-cdn.com/20180223/1941de0b87d64dbb6192789dc3af3db4.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: CraigB on February 23, 2018, 17:18:17
Looks good :goodjob2: it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual :undecided:

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto :undecided:
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 23, 2018, 18:37:51
Hahaha unfortunately it is not a typo! I ordered the gd-02 because I wasn’t able to find any gd-03. Found some on gumtree but the sellers are not responding so I had no choice...


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 23, 2018, 18:43:28
Installing the supervision cluster. Slide towards you the cluster shade and it will reveal 4 screws which you have to remove, the rest of the shade comes off after that. Then you have to lower the steering wheel and extend it outwards so you can have more room to work. Further more at the bottom of the cluster pull the plastic cover towards you (its a little bit hard so don’t be afraid). You will see 2 screws at the top and 2 at the bottom of the cluster which you will have to undo them. Then the cluster is free and you have to disconnect the connector. Connect the new cluster and repeat the steps in reverse to put everything back together!


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 23, 2018, 18:48:27
Looks good :goodjob2: it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual :undecided:

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto :undecided:
There is one for a manual diesel! https://www.autoparts24.co.uk/item/D_0076_2261310/#0


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: eye30 on February 23, 2018, 19:53:24
As bought from co.uk i presume uk supplier.

So if so is it not a miles readout rather than kilometers?

Also, in my service book you can record details of odometer change for service records etc
Title: Re: Supervision cluster retrofit on GD
Post by: CraigB on February 24, 2018, 17:44:00
Looks good :goodjob2: it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual :undecided:

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto :undecided:
There is one for a manual diesel!  :link: Hyundai i30 (GD) Dash Complete 94023-A6392 Welcome to Autoparts24 (https://www.autoparts24.co.uk/item/D_0076_2261310/#0)


Sent from my iPhone using Tapatalk
Diesel is no good, has to be petrol...I wont be paying that sort of price though :Shocked: $200 or $300 maybe but not $940 :faint:

Just checked and Super vision clusters are $100 here through ebay wreckers :) just need to find one for a manual petrol :fingers:
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 25, 2018, 04:28:59
As bought from co.uk i presume uk supplier.

So if so is it not a miles readout rather than kilometers?

Also, in my service book you can record details of odometer change for service records etc
It is a UK supplier but I think they buy products internationally thats why it reads in km.


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 25, 2018, 04:30:13
Looks good :goodjob2: it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual :undecided:

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto :undecided:
There is one for a manual diesel!  :link: Hyundai i30 (GD) Dash Complete 94023-A6392 Welcome to Autoparts24 (https://www.autoparts24.co.uk/item/D_0076_2261310/#0)


Sent from my iPhone using Tapatalk
Diesel is no good, has to be petrol...I wont be paying that sort of price though :Shocked: $200 or $300 maybe but not $940 :faint:

Just checked and Super vision clusters are $100 here through ebay wreckers :) just need to find one for a manual petrol :fingers:
I bought mine for £550 I think but where did you fount it for $100?


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: CraigB on February 25, 2018, 05:12:48
I bought mine for £550 I think but where did you fount it for $100?
Ebay with Australian wreckers, there's no price difference between standard or supervision all $100 - £56 :) there's quite alot for auto models.

 :link: HYUNDAI I30 INSTRUMENT CLUSTER PETROL, AUTO, TACHO IS UP TO 8 TYPE, GD,05/12- | eBay (http://www.ebay.com.au/itm/HYUNDAI-I30-INSTRUMENT-CLUSTER-PETROL-AUTO-TACHO-IS-UP-TO-8-TYPE-GD-05-12/201926557198?hash=item2f03c2be0e:g:a98AAOSwPh5ZG86G)

 :link: HYUNDAI I30 INSTRUMENT CLUSTER PETROL, MANUAL , TACHO IS UP TO 8 TYPE, GD 05/12- | eBay (http://www.ebay.com.au/itm/HYUNDAI-I30-INSTRUMENT-CLUSTER-PETROL-MANUAL-TACHO-IS-UP-TO-8-TYPE-GD-05-12/192377138931?hash=item2cca922ef3:g:GxAAAOSwXPNaG1Dg)

 :link: HYUNDAI I30 INSTRUMENT CLUSTER PETROL, AUTO T/M TYPE, TACHO IS UP TO 8 TYPE, GD, | eBay (http://www.ebay.com.au/itm/HYUNDAI-I30-INSTRUMENT-CLUSTER-PETROL-AUTO-T-M-TYPE-TACHO-IS-UP-TO-8-TYPE-GD/192381942403?hash=item2ccadb7a83:g:chAAAOSwFb5aILXR)

Found one for my manual though KM's are a little high so I'll wait till I find a lower km one, odometer can also be set through Hyundai apparently but they'll likely slug you for it.
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 25, 2018, 07:55:32
Oh! I found many too from Australian sellers but most of them don’t ship to my country.


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: guest9517 on February 25, 2018, 21:02:34
BRILLIANT :happydance: Especially since i have a cluster waiting for my GD  :goodjob:

As the one i have bought is in MPH, ill just swap the MPH backplate and use the one i have in my cluster now :-)

Did you think about tryng to move the EPROM over to get your original KM-reading back? Was thinking that circuit-board that doesnt control the LCD-scrren might be comaptible & hold the EPROM, or just desolder original & solder it into the new cluster? Since i havent seen the guts of my standard cluster yet, i cant tell whicj option is needed :-)

BTW i paid 85£ for mine incl P&P to Denmark from ireland on Ebay.
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 26, 2018, 12:02:46
I will try to disassemble the old one to check out your suggestion! Thanks!!!


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: guest9517 on February 26, 2018, 15:33:19
Ill send you a virtual beer if you send some close-up pictures of the circuitboard. Then ill compare to my supervision i still got in a box  :goodjob:
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 28, 2018, 09:23:00
Ill send you a virtual beer if you send some close-up pictures of the circuitboard. Then ill compare to my supervision i still got in a box  :goodjob:
Hello! Do you want pictures of the supervision’s board or the standard one?


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on February 28, 2018, 09:25:17
GD-02 installed too! The only problem was the camera (A9) wire which I had to remove in order for the head unit to work.(https://uploads.tapatalk-cdn.com/20180228/8b3aa76bc794f43ba00d42b25c8e2f6d.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: guest9517 on February 28, 2018, 13:08:11
If you have PCB-pictures of the standard cluster, it would be superb, thank you  :goodjob:
Title: Re: Supervision cluster retrofit on GD
Post by: wesleyrpg on March 21, 2018, 07:04:51
i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

now for the bad news, there's a few slight issues.

- There's a item called, Three point turn, buried in the setting menu, and selecting it causes a little hiccup/crash. My old dash had how many indicator flashes in its place. 3/5/7.

- There is a warning light called EPB in amber that is lit up. i assume it is short for Electronic Parking Brake.....in which my car doesn't have. Might have to pull the cluster out and try to get to the globe/LED and take it out.

Everything else is flawless.....

Title: Re: Supervision cluster retrofit on GD
Post by: Dazzler on March 21, 2018, 09:37:54
Thanks for the update. 
Title: Re: Supervision cluster retrofit on GD
Post by: guest9517 on March 21, 2018, 12:59:45
The EPB LED id easy to remove. I have my supervision-cluster open at home & shouldnt take to many solderingskills for you to get rid of it, but htanks for the heads-up..Believe mine also got that so will get rid of it before install  :goodjob:

i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

now for the bad news, there's a few slight issues.

- There's a item called, Three point turn, buried in the setting menu, and selecting it causes a little hiccup/crash. My old dash had how many indicator flashes in its place. 3/5/7.

- There is a warning light called EPG in amber lit up. i assume it is short for Electronic Parking Brake.....in which my car doesn't have. Might have to pull the cluster out and try to get at the globe or LED and take it out.

Everything else is flawless.....
Title: Re: Supervision cluster retrofit on GD
Post by: curlay on April 04, 2018, 10:46:59
i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

Where did you go to get the KMs wound back? Keen to do this swap (I've done it before in a 2004 Mistubishi Lancer) but am more cautious of the kms since this is a newer car
Title: Re: Supervision cluster retrofit on GD
Post by: wesleyrpg on June 30, 2018, 07:33:00
i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

Where did you go to get the KMs wound back? Keen to do this swap (I've done it before in a 2004 Mistubishi Lancer) but am more cautious of the kms since this is a newer car

There's a place just down the road from me in the SE suburbs of Melbourne. You'll need a Statutory Declaration if the km's need to be wound back. (Justice of the Peace). I'll post a link.

 :link: Lonsdale St Auto Electrics Pty Ltd > Home (http://www.gpsfortrucks.com.au/)
Title: Re: Supervision cluster retrofit on GD
Post by: wesleyrpg on January 20, 2019, 06:40:38
Just a quick update,

my car went in for its 45,000 km service, and the service consultant asked me if they was any issues with my car, i jokingly said there was an amber light on the dash not expecting them to fix it, and when the car came back from its service it was off. Wasn't charged anything for the fault, but they did try and up sell me set of wiper blades for $150! lol

i assume there is some way of disabling the LED via software, next time shes due for a service i'm going to ask what other software tricks they can do! (one touch up for the windows would be nice!)
Title: Re: Supervision cluster retrofit on GD
Post by: vlad0609 on November 19, 2019, 07:57:02
I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?
Title: Re: Supervision cluster retrofit on GD
Post by: Dazzler on November 19, 2019, 08:01:28
I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?

Wouldn't there be other hardware differences like gear selector indicators? :undecided:
Title: Re: Supervision cluster retrofit on GD
Post by: vlad0609 on November 19, 2019, 08:12:12
I don't know, that's why I ask.
Like hardware, looks the same:a big screen
Title: Re: Supervision cluster retrofit on GD
Post by: CraigB on November 19, 2019, 10:51:33
I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?
Your out of luck there, not possible sorry.
Title: Re: Supervision cluster retrofit on GD
Post by: j_a_h_2077 on November 19, 2019, 12:48:24
I would say it maybe possible, if you can find a dump of the eeprom dump for the manual diesel cluster. The EEPROM (which stores odometer value) appears to contain additional data for the cluster (like if it is diesel / petrol). When I converted mine to a supervision cluster, I was able to convert a petrol cluster motherboard to diesel by reflashing a dump of a diesel EEPROM from a non-supervision cluster successfully.

 I tried to solder my original EEPROM from my cluster onto the new diesel hypervision cluster but I ended up lifting tracks from too much heat. Grabbed a petrol hypervision cluster from the wreckers, flashed the EEPROM using a dump from my original cluster onto it, and put the motherboard into the diesel one. Everything worked ok, including tacho (verified using my clone VCDS).

Note that for flashing the EEPROM (M93C66) you need a very fine tipped soldering iron, as the SMD package is extremely small (TSSOP-8 IIRC), and you need an EEPROM dumper / burner.

In hindsight it maybe better to pay someone to do it. I chose to do it was I was quoted a price of $299 in Brisbane, with the vehicle off the road for 7 business days + a signed letter from a JP /  documentation from dealer with actual vehicle mileage.
Title: Re: Supervision cluster retrofit on GD
Post by: CraigB on November 19, 2019, 14:12:31
So it's possible though not an easy job by any standards, are all required auto/manual differences within the centre digital cluster...nothing on the gauges :undecided:

Is there not an option to obtain from a wrecker the manual supervision cluster :undecided:
Title: Re: Supervision cluster retrofit on GD
Post by: vlad0609 on November 19, 2019, 14:59:04
thanks! i'll search an original manual one.
Do I have the right code for 6, manual, diesel?
94023-A6392
Title: Re: Supervision cluster retrofit on GD
Post by: j_a_h_2077 on November 20, 2019, 02:19:49
The diesel cluster (automatic) one I got from the wreckers is:

94043-A5050

(https://i.imgur.com/TqLwWmq.jpg)

Petrol ones are fairly easy to find, diesel ones are harder.
Title: Re: Supervision cluster retrofit on GD
Post by: StokeyBry on July 07, 2020, 08:49:22
I have seen a supervision cluster for a petrol manual but it has km/h and no mph on the dial. Is it possible to swap the back piece? And will the cluster have an option to display the odometer in miles and range etc?

@aanastasiou4 Did you try this
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on July 07, 2020, 10:29:20
There is no option in the menu to switch between Miles and KM but the dial readings can be replaced from what I've seen


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: StokeyBry on July 07, 2020, 11:23:16
Thanks for the quick reply.
I will possibly leave this upgrade then unless I can find a UK version which seems to be impossible to find at the moment
Title: Re: Supervision cluster retrofit on GD
Post by: aanastasiou4 on July 07, 2020, 11:50:10
Thanks for the quick reply.
I will possibly leave this upgrade then unless I can find a UK version which seems to be impossible to find at the moment
Search on breakerlink. It's a UK based website and I'm pretty sure someone 'll have a speedo with MPH on it


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: StokeyBry on July 07, 2020, 13:22:31
I will have a look and see what I can find.
I have seen this one on eBay for a 1.6 manual turbo petrol, but I’ve never seen this design before

 :link: I30 Turbo Instrument cluster (https://www.ebay.co.uk/itm/274399630040)
Title: Supervision cluster retrofit on GD
Post by: aanastasiou4 on July 07, 2020, 13:43:48
I will have a look and see what I can find.
I have seen this one on eBay for a 1.6 manual turbo petrol, but I’ve never seen this design before

 :link: I30 Turbo Instrument cluster (https://www.ebay.co.uk/itm/274399630040)
This is for the i30 Turbo model though! I am not sure if it's plug and play. It has a black and white screen instead of the color display of the supervision cluster. The oil temp and fuel gauges are also analog not digital


Sent from my iPhone using Tapatalk
Title: Re: Supervision cluster retrofit on GD
Post by: ibrokeit on July 11, 2020, 01:21:18
I know I am replying many months later - but thanks for the rundown of what you did with the EEPROM - electronics and embedded software is my tertiary background.

I would say it maybe possible, if you can find a dump of the eeprom dump for the manual diesel cluster. The EEPROM (which stores odometer value) appears to contain additional data for the cluster (like if it is diesel / petrol). When I converted mine to a supervision cluster, I was able to convert a petrol cluster motherboard to diesel by reflashing a dump of a diesel EEPROM from a non-supervision cluster successfully.

 I tried to solder my original EEPROM from my cluster onto the new diesel hypervision cluster but I ended up lifting tracks from too much heat. Grabbed a petrol hypervision cluster from the wreckers, flashed the EEPROM using a dump from my original cluster onto it, and put the motherboard into the diesel one. Everything worked ok, including tacho (verified using my clone VCDS).

Note that for flashing the EEPROM (M93C66) you need a very fine tipped soldering iron, as the SMD package is extremely small (TSSOP-8 IIRC), and you need an EEPROM dumper / burner.

In hindsight it maybe better to pay someone to do it. I chose to do it was I was quoted a price of $299 in Brisbane, with the vehicle off the road for 7 business days + a signed letter from a JP /  documentation from dealer with actual vehicle mileage.
Title: Re: Supervision cluster retrofit on GD
Post by: outback jack on February 28, 2021, 02:57:17
Hi All, Old post revival......

I have a 2012 GD Wagon. Will this cluster upgrade work? I had to replace the starter motor and that was a night mare to find. Still got wrong one and had to repair old one with new one....

So hence my question, they all look the same, but there are differences.
Title: Re: Supervision cluster retrofit on GD
Post by: Cass2013 on April 19, 2021, 08:44:55
Id also love to do this in my 2013 Manual Petrol i30. If I was to get an upgraded cluster from say an 2013 Elite Manual petrol. Would it be plug and play or would there need to be any rewiring involved? I really want to to this. Looks so much nicer.
SimplePortal 2.3.5 © 2008-2012, SimplePortal