[aanastasiou4]

Today I finally took the risk to replace the traditional instrument cluster with the newer supervision one! I bought it from autoparts24.co.uk. The swap was plug and play and extremely easy, there are just 8 screws to be removed. The only problems are that the new cluster reads much less km that my car actually has since it has been removed from a newer salvage car and the seat belt warning is not as loud as the old cluster. It is a lot more ‘cleaner’ and also has some more modern sound effects compared to the old one. It also has a car service reminder. I don’t have any pictures of the swapping process but I have the finished product!
If anyone is interested in the process I can happily explain step by step. I have also ordered a gd-02 headunit to replace the standard one. Still waiting for that!
Original cluster


Supervision cluster



Sent from my iPhone using Tapatalk

[CraigB]

Looks good it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto

[aanastasiou4]

Hahaha unfortunately it is not a typo! I ordered the gd-02 because I wasn’t able to find any gd-03. Found some on gumtree but the sellers are not responding so I had no choice...


Sent from my iPhone using Tapatalk

[aanastasiou4]

Installing the supervision cluster. Slide towards you the cluster shade and it will reveal 4 screws which you have to remove, the rest of the shade comes off after that. Then you have to lower the steering wheel and extend it outwards so you can have more room to work. Further more at the bottom of the cluster pull the plastic cover towards you (its a little bit hard so don’t be afraid). You will see 2 screws at the top and 2 at the bottom of the cluster which you will have to undo them. Then the cluster is free and you have to disconnect the connector. Connect the new cluster and repeat the steps in reverse to put everything back together!


Sent from my iPhone using Tapatalk

[aanastasiou4]

Looks good it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto

There is one for a manual diesel! https://www.autoparts24.co.uk/item/D_0076_2261310/#0


Sent from my iPhone using Tapatalk

[eye30]

As bought from co.uk i presume uk supplier.

So if so is it not a miles readout rather than kilometers?

Also, in my service book you can record details of odometer change for service records etc

[CraigB]

Looks good it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto

There is one for a manual diesel! Hyundai i30 (GD) Dash Complete 94023-A6392 Welcome to Autoparts24


Sent from my iPhone using Tapatalk

Diesel is no good, has to be petrol...I wont be paying that sort of price though $200 or $300 maybe but not $940

Just checked and Super vision clusters are $100 here through ebay wreckers just need to find one for a manual petrol

[aanastasiou4]

As bought from co.uk i presume uk supplier.

So if so is it not a miles readout rather than kilometers?

Also, in my service book you can record details of odometer change for service records etc

It is a UK supplier but I think they buy products internationally thats why it reads in km.


Sent from my iPhone using Tapatalk

[aanastasiou4]

Looks good it'll be beneficial for other members if you could explain the process, including me as I wouldn't mind doing it myself if it's possible to find one for a manual

I hope GD02 is a typo and you've ordered the GD03 head unit which has apple play and android auto

There is one for a manual diesel! Hyundai i30 (GD) Dash Complete 94023-A6392 Welcome to Autoparts24


Sent from my iPhone using Tapatalk

Diesel is no good, has to be petrol...I wont be paying that sort of price though $200 or $300 maybe but not $940

Just checked and Super vision clusters are $100 here through ebay wreckers just need to find one for a manual petrol

I bought mine for £550 I think but where did you fount it for $100?


Sent from my iPhone using Tapatalk

[CraigB]

I bought mine for £550 I think but where did you fount it for $100?

Ebay with Australian wreckers, there's no price difference between standard or supervision all $100 - £56 there's quite alot for auto models.

HYUNDAI I30 INSTRUMENT CLUSTER PETROL, AUTO, TACHO IS UP TO 8 TYPE, GD,05/12- | eBay

HYUNDAI I30 INSTRUMENT CLUSTER PETROL, MANUAL , TACHO IS UP TO 8 TYPE, GD 05/12- | eBay

HYUNDAI I30 INSTRUMENT CLUSTER PETROL, AUTO T/M TYPE, TACHO IS UP TO 8 TYPE, GD, | eBay

Found one for my manual though KM's are a little high so I'll wait till I find a lower km one, odometer can also be set through Hyundai apparently but they'll likely slug you for it.

[aanastasiou4]

Oh! I found many too from Australian sellers but most of them don’t ship to my country.


Sent from my iPhone using Tapatalk

BRILLIANT Especially since i have a cluster waiting for my GD 

As the one i have bought is in MPH, ill just swap the MPH backplate and use the one i have in my cluster now :-)

Did you think about tryng to move the EPROM over to get your original KM-reading back? Was thinking that circuit-board that doesnt control the LCD-scrren might be comaptible & hold the EPROM, or just desolder original & solder it into the new cluster? Since i havent seen the guts of my standard cluster yet, i cant tell whicj option is needed :-)

BTW i paid 85£ for mine incl P&P to Denmark from ireland on Ebay.

[aanastasiou4]

I will try to disassemble the old one to check out your suggestion! Thanks!!!


Sent from my iPhone using Tapatalk

Ill send you a virtual beer if you send some close-up pictures of the circuitboard. Then ill compare to my supervision i still got in a box 

[aanastasiou4]

Ill send you a virtual beer if you send some close-up pictures of the circuitboard. Then ill compare to my supervision i still got in a box 

Hello! Do you want pictures of the supervision’s board or the standard one?


Sent from my iPhone using Tapatalk

[aanastasiou4]

GD-02 installed too! The only problem was the camera (A9) wire which I had to remove in order for the head unit to work.


Sent from my iPhone using Tapatalk

If you have PCB-pictures of the standard cluster, it would be superb, thank you 

[wesleyrpg]

i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

now for the bad news, there's a few slight issues.

- There's a item called, Three point turn, buried in the setting menu, and selecting it causes a little hiccup/crash. My old dash had how many indicator flashes in its place. 3/5/7.

- There is a warning light called EPB in amber that is lit up. i assume it is short for Electronic Parking Brake.....in which my car doesn't have. Might have to pull the cluster out and try to get to the globe/LED and take it out.

Everything else is flawless.....

[Dazzler]

Thanks for the update. 

The EPB LED id easy to remove. I have my supervision-cluster open at home & shouldnt take to many solderingskills for you to get rid of it, but htanks for the heads-up..Believe mine also got that so will get rid of it before install 

i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

now for the bad news, there's a few slight issues.

- There's a item called, Three point turn, buried in the setting menu, and selecting it causes a little hiccup/crash. My old dash had how many indicator flashes in its place. 3/5/7.

- There is a warning light called EPG in amber lit up. i assume it is short for Electronic Parking Brake.....in which my car doesn't have. Might have to pull the cluster out and try to get at the globe or LED and take it out.

Everything else is flawless.....

[curlay]

i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

Where did you go to get the KMs wound back? Keen to do this swap (I've done it before in a 2004 Mistubishi Lancer) but am more cautious of the kms since this is a newer car

[wesleyrpg]

i finally got around to getting a GD supervision cluster installed in my baby as well!

cost involved $100 for the instrument cluster on ebay, $200 ish for the km's to be wound back and matching the current kms, and about $50 to get it fitted.

Where did you go to get the KMs wound back? Keen to do this swap (I've done it before in a 2004 Mistubishi Lancer) but am more cautious of the kms since this is a newer car

There's a place just down the road from me in the SE suburbs of Melbourne. You'll need a Statutory Declaration if the km's need to be wound back. (Justice of the Peace). I'll post a link.

Lonsdale St Auto Electrics Pty Ltd > Home

[wesleyrpg]

Just a quick update,

my car went in for its 45,000 km service, and the service consultant asked me if they was any issues with my car, i jokingly said there was an amber light on the dash not expecting them to fix it, and when the car came back from its service it was off. Wasn't charged anything for the fault, but they did try and up sell me set of wiper blades for $150! lol

i assume there is some way of disabling the LED via software, next time shes due for a service i'm going to ask what other software tricks they can do! (one touch up for the windows would be nice!)

[vlad0609]

I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?

[Dazzler]

I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?

Wouldn't there be other hardware differences like gear selector indicators?

[vlad0609]

I don't know, that's why I ask.
Like hardware, looks the same:a big screen

[CraigB]

I have manual, diesel. If I buy a supervision cluster for auto can I overwrite the software, to make it suitable for manual?

Your out of luck there, not possible sorry.

[j_a_h_2077]

I would say it maybe possible, if you can find a dump of the eeprom dump for the manual diesel cluster. The EEPROM (which stores odometer value) appears to contain additional data for the cluster (like if it is diesel / petrol). When I converted mine to a supervision cluster, I was able to convert a petrol cluster motherboard to diesel by reflashing a dump of a diesel EEPROM from a non-supervision cluster successfully.

 I tried to solder my original EEPROM from my cluster onto the new diesel hypervision cluster but I ended up lifting tracks from too much heat. Grabbed a petrol hypervision cluster from the wreckers, flashed the EEPROM using a dump from my original cluster onto it, and put the motherboard into the diesel one. Everything worked ok, including tacho (verified using my clone VCDS).

Note that for flashing the EEPROM (M93C66) you need a very fine tipped soldering iron, as the SMD package is extremely small (TSSOP-8 IIRC), and you need an EEPROM dumper / burner.

In hindsight it maybe better to pay someone to do it. I chose to do it was I was quoted a price of $299 in Brisbane, with the vehicle off the road for 7 business days + a signed letter from a JP /  documentation from dealer with actual vehicle mileage.

[CraigB]

So it's possible though not an easy job by any standards, are all required auto/manual differences within the centre digital cluster...nothing on the gauges

Is there not an option to obtain from a wrecker the manual supervision cluster

[vlad0609]

thanks! i'll search an original manual one.
Do I have the right code for 6, manual, diesel?
94023-A6392