i30 Owners Club
GOT PROBLEMS OR ISSUES? => DIESEL => Topic started by: chris_i30gd on September 09, 2017, 19:37:52
-
I recently changed oil in my i30 diesel 1.4 crdi 2013 model and I added liqui moly ceramic additive.
This one: :link: Liqui Moly Ceratec Engine Oil Additive Ceramic Wear Protection 3721 5 pack | eBay (http://www.ebay.com/itm/Liqui-Moly-Ceratec-Engine-Oil-Additive-Ceramic-Wear-Protection-3721-5-pack-/171639723408)
After 500km of use and a short 200km trip that I have done today
the temperature was 1 line under 90C degrees and has 5 lines in gauge when I arrived.
(https://i.imgur.com/RwMDVa8.jpg)
I forgot If I had 5 or 6 lines temperature before. Can you inform me your temp gauge info :)
Thanks!
-
Mine is always 5 bars when hot.
-
yes - so its 5 bars the normal ok thanks!
-
5 Bars in dash, 87-94 C on Eobd while driving
-
Oil temp should be about the same as engine temp - 90 deg C.
Most thermostat 's are 90 deg C.
Yes /No ?
-
Typically my engine oil temp. is 10-15 C lower than coolant when at speed after 40-50 Km of driving (15-20 C outside temp)
-
By the way liqui moly oil + ceramic additive has reduced the diesel engine noise. It sounds almost like petrol
-
I'm attracted to reducing the Diesel clackers but the temperature detail is unclear to an FD driver. Did the additive change the temperature?
-
I haven't measure the Temperature of engine and oil.
But the engine noise is reduced and I can hear it working better.
Also if you search online for reviews about this company's additive products
they have great reviews for all.