i30 Owners Club

MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: eze2410 on June 06, 2019, 10:27:58

Title: Install microphone to factory HU
Post by: eze2410 on June 06, 2019, 10:27:58
I have just changed my HU to a standard HU with Bluetooth. As my car trim level didn't come with Bluetooth and is EU model it doesn't have a microphone above the driver side. Does anyone know if the wiring for the micro is in my car or can one be wired in to the back of the HU. Also does anyone have pin out/ wiring diagram for the loom into HU. I'm hoping I might be able to wire a microphone in if needed.
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 06, 2019, 12:08:55
I have just changed my HU to a standard HU with Bluetooth. As my car trim level didn't come with Bluetooth and is EU model it doesn't have a microphone above the driver side. Does anyone know if the wiring for the micro is in my car or can one be wired in to the back of the HU. Also does anyone have pin out/ wiring diagram for the loom into HU. I'm hoping I might be able to wire a microphone in if needed.
(https://uploads.tapatalk-cdn.com/20190606/e9bd1b63cc06129277cbad317a24e24e.jpg)

Seems to be pins B10 and B22! Check if those 2 slots have wires connected on them.



Title: Re: Install microphone to factory HU
Post by: eze2410 on June 06, 2019, 12:16:06
You are a star mate.
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 06, 2019, 14:09:45
You are a star mate.
Hahaha thanks!


Title: Re: Install microphone to factory HU
Post by: eze2410 on June 06, 2019, 14:11:35
Does anyone know if you can terminate wires into the terminals on the back of the stereo plugs in my case pin 10 and 22
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 06, 2019, 14:16:49
Does anyone know if you can terminate wires into the terminals on the back of the stereo plugs in my case pin 10 and 22
You have to buy some pins from ebay or something and they just plug in easily!


Title: Re: Install microphone to factory HU
Post by: eze2410 on June 06, 2019, 14:37:09
Any idea what Im Searching for on ebay?
Title: Install microphone to factory HU
Post by: aanastasiou4 on June 06, 2019, 17:37:52
Any idea what Im Searching for on ebay?
Since, I did a lot of modifications I bought this set.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162827532863
They are called crimp pins and you will need the female ones. Before buying them, check if your car has the wires already in place. If it has them, you won't need to buy the pins.
Title: Re: Install microphone to factory HU
Post by: eze2410 on June 06, 2019, 20:04:36
I think the wires at 10 and 22 on the connector block b 10 are there. The wire joins a loom and goes behind the glove box and up a pillar trim so I think the mic wire is there I need to take trim off to hav a proper look which I will do at the weekend. I've had a look at an i30 that came with a microphone fitted and it is directly above the drivers head so hopefully the wire is there just with no microphone fitted. Fingers crossed has anyone else attempted what I'm about to do?
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 06, 2019, 20:21:05
I think the wires at 10 and 22 on the connector block b 10 are there. The wire joins a loom and goes behind the glove box and up a pillar trim so I think the mic wire is there I need to take trim off to hav a proper look which I will do at the weekend. I've had a look at an i30 that came with a microphone fitted and it is directly above the drivers head so hopefully the wire is there just with no microphone fitted. Fingers crossed has anyone else attempted what I'm about to do?
If you take off the pillar there is a connector behind it so, be sure to check that the mic wires go up on the other side of that connector as well!
If they are in place, you will be able to connect any microphone you like. (You will have to splice into those wires though).


Title: Re: Install microphone to factory HU
Post by: StokeyBry on June 06, 2019, 21:57:44
Yes that’s true most wiring looms are the same, so technically it will be possible and you may just need to make an hole or acquire a mic
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 07, 2019, 06:17:03
Yes that’s true most wiring looms are the same, so technically it will be possible and you may just need to make an hole or acquire a mic
Exactly!


Title: Re: Install microphone to factory HU
Post by: eze2410 on June 07, 2019, 16:37:48
Thanks guys Ive got free evening Saturday so will have a play then  :crazy1:
Title: Re: Install microphone to factory HU
Post by: eze2410 on June 10, 2019, 13:54:42
Update

Well I pulled my car about on Saturday. I was able to trace the wire up to head lining but as the wire was with a load of others making up one of the cars looms so I was unable to find it so I went with plan B.

My idea was was to connect a spare parrot kit mic into the back of the iso connector. So using the wiring diagram kindly provided by aanastasiou4. I located wires connected in to pin 10 and 22 and soldered the two legs of the parrots mic wires.

As I'm a complete novice I was amazed it worked and the sound quality is crystal clear happy days.
Title: Re: Install microphone to factory HU
Post by: aanastasiou4 on June 10, 2019, 16:24:04
Update

Well I pulled my car about on Saturday. I was able to trace the wire up to head lining but as the wire was with a load of others making up one of the cars looms so I was unable to find it so I went with plan B.

My idea was was to connect a spare parrot kit mic into the back of the iso connector. So using the wiring diagram kindly provided by aanastasiou4. I located wires connected in to pin 10 and 22 and soldered the two legs of the parrots mic wires.

As I'm a complete novice I was amazed it worked and the sound quality is crystal clear happy days.
Excellent job man!


SimplePortal 2.3.5 © 2008-2012, SimplePortal