The i30 Owners Club

Swapping out a i30 Navigation unit for a Kenwood DDX-9018DABS

0 Members and 1 Guest are viewing this topic.

Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Hi all,

I have just bought a Kenwood DDX-9018DABS from supercheap auto for $880 on sale.

I have just got the steering wheel control to work. turns out that the kin out on Nav unit  is different for the aerpro CHHY8C just pin 4 needed to be move to pin 5.


and the audio pins need to move too  :( so much for a plug and play kit

the next job is to get the oem  backup camera to work


here are some of the photos of the
 











  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline CraigB

  • Global Moderator
  • *
    • Posts: 10,918

    • au Australia
      Perth, WA
Looks good :goodjob:

Looks like Aerpro sent you the kit for the GD 1 and 2 where you would have required the GD 3 kit, I believe they all have a slightly different kits and with further slight variations for NAV unit upgrades, it's quite a mine field to work through but you did well to rectify that hurdle :goodjob2:


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,419

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Thanks for the photos! Nice upgrade!  :victory:
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Hi
Looks good :goodjob:

Looks like Aerpro sent you the kit for the GD 1 and 2 where you would have required the GD 3 kit, I believe they all have a slightly different kits and with further slight variations for NAV unit upgrades, it's quite a mine field to work through but you did well to rectify that hurdle :goodjob2:

Yar on the Aerpro website there is only one kit. and for the Facia Kit no one in Australia stock it or could get it. i had to order it from the US
« Last Edit: July 31, 2018, 02:45:37 by b15hop40k »
  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Update.

Turns out the wiring maps for the speakers were complete difficulty to the wire map on here. and all also got to Retention OEM fold out camera too. :crazy1:

  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,419

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Update.

Turns out the wiring maps for the speakers were complete difficulty to the wire map on here. and all also got to Retention OEM fold out camera too. :crazy1:

Umm... Did you mean to say...

Turns out the wiring maps for the speakers were completely different to the wire map on here? (not sure about the other bit)  :undecided:

I'm guessing you had to allocate a different pin/wire to get the camera working??  :cool:
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Yar, The camera just need to be power and a video signal. The 3rd plug with 4 wires in pin 10,12,22,24. 2 are power and 2 for video. at this stage it was a just a test to get it working went my new jack. I will do a full write up. with parts and photos and the way I write mine up.
  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,419

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Ok thanks.   :goodjob2: :goodjob:
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Job Done.

the OEM fold out camera is working fine. for about $30 to get working.   


(Video) Pin 24 is Black/ ground wire for RCA yellow
(Video) Pin 12 is positive for RCA Yellow
(Power) Pin 10 is positive for the camera
(Power) Pin 22 is Black/Ground for camera
Note the camera is 6V so you will a DC to DC step down aka 12v in 6v out 

also have a look at the following post

:link: Swapping out a i30 Navigation unit for GD-03 unit


I'm using a DC-DC Buck Module 3-40V In / 1.5-35V Out from :link: Z6334 DC-DC Buck Module 3-40V In / 1.5-35V Out - Altronics

And the plug you will need is a TE Connectivity MULTILOCK 025, 2.2mm Pitch, 24 Way, 2 Row Female Right Angle PCB Header
I got mine from RS and the stock number is 712-1274















ammonium sulfate molecular mass






  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,419

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Excellent. Thanks for the details and the photos.. I'll sticky this post to help others going forward (stop it getting lost)  :cool:
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
Part 2.

the kenwood KSC-PSW8 sub and amp. i would highly recommend it. as it goes under the front seat


here are some photos for remove the grove box




























  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline CraigB

  • Global Moderator
  • *
    • Posts: 10,918

    • au Australia
      Perth, WA
If I end up doing a sub I'll be doing similar in Kenwwood or Alpine, that Kenwood looks a bit thinner so might be a better fit :goodjob2:

I hope you didn't pay that price tag...they're $299 in shops here and online.


Offline b15hop40k

  • 1st Gear
  • *
    • Posts: 9

    • au Australia
      Brisbane
If I end up doing a sub I'll be doing similar in Kenwwood or Alpine, that Kenwood looks a bit thinner so might be a better fit :goodjob2:

I hope you didn't pay that price tag...they're $299 in shops here and online.


I pay $330 sale price which is not to bad and a 5 mins trap to pick it up. Or $310 with shipping.

The install take me about 3 hours put in. and you will need to remove the dust extractor under the seat to make it fit. Also there good ground point near the grove box. and you will need a set of RCA cables. I also wrapped the cables which help went running the cables. To get the cable to the battery there a grommet under the carpet on the passenger side. which I used or will need to drill a hole.


Sound way is great just enough to you give bass without going overboard
  • 2015 SR 4D Hatch, petrol 2.0lt,Auto, White


Offline CraigB

  • Global Moderator
  • *
    • Posts: 10,918

    • au Australia
      Perth, WA
If I get a sub I’ll have it fitted by Alberts who did my Morel speaker install, if I wait till their old stock 70% off sale then the sub including install will be somewhere around $350, with my back I wouldn’t want to play around under the dash and seat for to long  :sweating:

Those dust extractors under the seat as you call them are actually the rear air vent outlets, put the feet setting on your fan and you’ll feel air coming out of them :)


Unread Posts

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal