[NATHAN_P]

I change the turn  bulbs with led and because of the low amp they start blinking fast.
There are too options ,
1 install resistors betwen the pos and neg wires 50 W 6 ohm but i don't wont a barbecue inside the car.
2 change the turning relay with  an new electronic one Electronic LED Flasher Relay for Car Turn Signal Light Adjustable from 0.1 W to 150 W.
The second option is more friendly , but i don't know how many pins in the  relay , to order before i disconnect it   3, 5 ,8  and where is located.
Does any body  have any picture or there is a youtube or the model that will fit?

[CraigB]

If it has a relay ( the GD model doesn't) it'll be in the fuse box inside the engine bay I think there will be a placard stickered inside the cover that will show which is the relay...if not there it'll be in fuse compartment under the dash.

[tw2005]

I'd be leaning towards inside the car, that's why you can hear it click.

[NATHAN_P]

Thanks any way but i think it is inside the car, that's why you can hear it click.