[TIGER-PETE]

Any ideas on how to replace the Rubber/Silicon Door Lock, Boot and open section of a key on a 2011 i30?

[Dazzler]

Any ideas on how to replace the Rubber/Silicon Door Lock, Boot and open section of a key on a 2011 i30?

Pretty sure you can get just the skins and/or a whole new empty fob cheap on EBay, I'll try and find some links..

Here you go! Both from Hong Kong so should ship to most places worldwide.

http://www.ebay.com.au/itm/2PCS-Remote-Car-3-Buttons-Key-Fobs-Case-Rubber-Shell-For-Hyundai-I10-I20-I30-Hot-/262729433545?epid=584530773&hash=item3d2be501c9:g:O0IAAOSwcLxYM6f6

http://www.ebay.com.au/itm/Car-Remote-Key-Fob-Case-Shell-Blade-Repair-Refurbishment-For-HYUNDAI-I30-i35-/401109349703?epid=1687912131&hash=item5d63faf547:g:fBwAAOSwYudXGYPF

I think the cases just prise open with w knife or screwdriver. Just be ware if you swap the whole case there is a chip sort of hidden in the original case you need to switch for the immobilizer.

[TIGER-PETE]

Cheers mate.
I was a bit concerned about attacking it with a knife.... oh well, give it a go and see what happens.
I did get the skins on Ebay.... 2 for $9.
Hooroo
Tiger

[Shambles]

There are a few posts about this: here's one of them

HOW TO: Dismantle the remote keyfob