[jesam]

http://www.dropbox.com/s/by1bmpiro9rkkzf/exhaust1_1_axleback-hd__31085.1405390525.160.120.jpeg?dl=0


Will this fit the i30 crdi 1.6 2008 i think it will but ne feedback will be good

[cruiserfied]

It won't be a bolt on job. The pipe will have to be welded on and I'm not sure there is provision for exhaust rubber on LHS.
Then there is the question of where will the tips fit?

[jesam]

Yep new bracket has to be welded on the LHS ive decided to have one made because its a pain in the ass to get it here from korea started this mod today but as long as it is done right it should look good its not a performance mod as it is a diesel its totally cosmetic.will post some pics when it is all done 

[Dazzler]

Yep new bracket has to be welded on the LHS ive decided to have one made because its a pain in the ass to get it here from korea started this mod today but as long as it is done right it should look good its not a performance mod as it is a diesel its totally cosmetic.will post some pics when it is all done 

Sounds good (well I hope it does) Look forward to more info and pictures! 

[jesam]

https://www.dropbox.com/s/jpat51c2gzesxs8/20150207_135501.jpg?dl=0

Right  then all done dont look that bad no real change  in exhaust note but it is a diesel this was done just for the look .took me 4 hrs to do bit of a git to put LHS bracket on  as it was really close to fuel line but took my time and had a fire extinguisher at the ready just in case LOL and covered lines in tinfoil well it worked while i was welding

[cruiserfied]

Very good

[Asterix]

Looking good with that new exhaust, jesam.. 

[jesam]

Thanks asterix .i can tick that one off the list just waiting for some more parts to arrive   

[Johnno]

Looks Good

[Dazzler]

  Any chance of some under car shots?

[Phil №❶]

Did you use a bituminous compound to protect the floor after welding. Need to stop rust weakening your bracket. Looks good.

[jesam]

Little up date well happy with this look but going to take off and fabricate in stainless steel now that i have all the correct measurements should take me about a week as i do have to work as well when i am all done i will take some detailed photos for any one thats interested 

[CraigB]

Are you converting the whole exhaust to stainless or just the rear section you have replaced?

[jesam]

Just the back like the one in my first post on this page catback system

[CraigB]

Is it worth the effort if only changing the rear, it's not something that people are under the car admiring unless you are planning on a show car and you have the chrome tips which is all anyone will ever see.

You'd get more benefit spending money upgrading the catalytic converter and muffler to free flowing imo.

[jesam]

Yeh i was kinda thinking the same thing i might build up to the cat like the koreanautoimports.com one 

[CraigB]

That sounds like a plan, at least you/car should get a slight benefit in performance other than just aesthetics

[Dazzler]

  And you can always replace it with a stainless one in a few years if you keep the car long term and this one deteriorates.