0 Members and 1 Guest are viewing this topic.
I have ordered a workshop manual CD from Scotland just waiting for it to arrive, so I can confirm my theory and then I'll update here ASAP
I have now found a solution to the problem, and yesterday in my i30 ISG fold lift installed. The whole thing works fine, go all the instrument lights and illuminated pushbuttons, switches, etc. cigarette lighter or both off the lights when ignition key to "ON" and also the rheostat does what it should. And now the best part: the whole thing is 15 minutes work costs, 5mm solder and 2cm scotch tape! First Remove fuse cover on the dashboard Second the aperture in the lid is secure, remove through getting pulling the door from the far side rubber Third Controls how Leuchweiteregelung remove etc. by pressing the back and pull the plug 4th the 2 screws at the side of the lower instrument panel 5th below loosen the other 2 screws from the lower instrument panel 6th the lower instrument panel to the upper 2 clips carefully loosen and swing down 7th OBD connector unclip or unscrew the plate. 8th the two connectors I / PB and I / PC which is directly behind the other pull 9th the red / orange wire on pin 3 of connector I / PC 2cm from the plug to 5mm Strip Length 10th the pink (pink) wire from pin 18 of the black connector I / PB 2cm from the plug to cut and solder it to the red / orange wire on pin 3 of connector I / PC 11th the solder joint with Scotch tape to isolate 12th reassemble it 13th enjoy a bottle of beer, open up and grin
you can find my solution to solve this problem here:
Quote from: pjotr_weliki on September 18, 2012, 14:27:22you can find my solution to solve this problem here:Nice work Peter - thanks for sharing it with your new best forum
BTW I've been forbidden to do the mod