Backup OEM camera retrofit

aanastasiou4 · **April 24, 2018, 12:49:46**

I retrofitted today the OEM hyundai badge camera. I only connected the open/close function since I am waiting for my GD-03 head-unit to arrive!

Sent from my iPhone using Tapatalk

Dazzler · **Reply #1: April 24, 2018, 12:52:53**

So this will fit any GD model?

aanastasiou4 · **Reply #2: April 24, 2018, 20:27:37**

Yes! You have to remove the badge of a non camera fitted model and cut the hole for the camera assembly! You have to splice the wires and extend them to go all the way to the radio (gd-02, gd-03 radios only)
Red wire: connected to the battery
Black wire: negative
Green wire: connected to the backup bulb
Blue wire: (ignition) connected to the + of the cigarette plug.
The above wires are only for the open/close function. When I connect the camera I will explain that too!

Sent from my iPhone using Tapatalk

Dazzler · **Reply #3: April 24, 2018, 22:02:59**

@aanastasiou4

What steps did you take to avoid future corrosion issues on the cut edge and what did you use to cut an oval hole. Was it tricky?

aanastasiou4 · **Reply #4: April 25, 2018, 04:33:33**

I used touch up paint on the cut edges. To cut the hole I marked the area and used my drill to cut through!

Sent from my iPhone using Tapatalk

**Reply #5: April 25, 2018, 10:21:16**

Link to rear view camera thread

#11 This is what it looks like when installed

aanastasiou4 · **Reply #6: April 28, 2018, 07:03:18**

I connected the camera too and it works perfectly!

Sent from my iPhone using Tapatalk

Dazzler · **Reply #7: April 28, 2018, 09:32:32**

Excellent! Well done!

aanastasiou4 · **Reply #8: April 28, 2018, 10:08:23**

Inform me if anyone wants me to explain the procedure:)

Sent from my iPhone using Tapatalk

smash046 · **Reply #9: May 20, 2018, 18:42:53**

Congratulations for the great job!
For the opening / closing function you explained the cable connection!
Can you explain the camera connection as you promised?

Quote

When I connect the camera I will explain that too!

aanastasiou4 · **Reply #10: May 20, 2018, 19:57:55**

Quote from: smash046 on May 20, 2018, 18:42:53

Congratulations for the great job!
For the opening / closing function you explained the cable connection!
Can you explain the camera connection as you promised?

Quote
When I connect the camera I will explain that too!

You have to extend the wires from the camera connector to run them from the tailgate all the way to the radio.
The camera wires are coloured so it is easy to install it.

Blue wire: camera power. Connect it on the reverse light. Also because I couldn’t got the signal wire on the radio to work I connected this blue wire in the signal pin hole (position a9 on the radio connector)
Red wire: video out (a15 pin hole on the radio)
Green wire: video ground (a14 pin hole on the radio)
Black wire: camera ground (a5 pin hole on the radio).
This diagram might help you.

Sent from my iPhone using Tapatalk