Hi folks and Happy New Year
Last week the windscreen washers were working fine. All of a sudden today, neither nozzle is spraying any fluid on the windscreen.
I removed the pipe join and liquid is flowing through at a good rate, so the pump is fine.
I've blown compressed air to try and clear the blockage between this join point and the nozzles, but this has had no effect. I've tried covering one nozzle at a time when blowing the air.
I've used previous threads to troubleshoot but not sure what to do next. I wonder whether the pipe is blocked or possibly has come loose.
I'm not too confident about removing the wiper arms and the plastic windscreen trim to access the nozzles from underneath and the pipes, as this requires removal of 4 plastic retaining screws which could break.
Any ideas? I was going to prise the spray nozzles upwards, but don't want to risk breaking anything if they should be addressed/released from underneath. Any help very much welcome!