i30 Owners Club
THE GARAGE (SERVICE, MAINTENANCE & REPAIR) => GENERAL => Topic started by: vanjav on November 07, 2022, 00:05:39
-
Hey all,
Pretty new to this forum, so I’m not sure if I should be asking this here but I’m trying to put the stock intake box onto the intake piping and I’m unsure about the clamp between the piping and the actual filter box. An image showing which part is attached below. Would anyone be able to guide me as to how to put it back on?
(https://i.ibb.co/zfzB6rK/1-E7413-C5-ABF5-4-F06-93-B4-C41-EC514-E178.jpg) (https://ibb.co/RHqsj9L)
-
Make sure the clamp is undone enough to loosely fit over the intake tube, then slide the tube over the airbox outlet and tighten clamp till it's firm.
-
Make sure the clamp is undone enough to loosely fit over the intake tube, then slide the tube over the airbox outlet and tighten clamp till it's firm.
@ vanjav. Did CRaigB's suggestion work for you?