Author Topic: exhaust  (Read 2071 times)

0 Members and 1 Guest are viewing this topic.

  • *
  • Posts: 53
  • cy Cyprus
    kyrenia
exhaust
« February 05, 2015, 12:45:55 »
http://www.dropbox.com/s/by1bmpiro9rkkzf/exhaust1_1_axleback-hd__31085.1405390525.160.120.jpeg?dl=0


Will this fit the i30 crdi 1.6 2008 i think it will but ne feedback will be good


  • hyundai i30 2008 crdi

  • *
  • Posts: 3,210
  • au Australia
    Grafton, NSW
  • Crooked-H Hero
Re: exhaust
« Reply #1 : February 05, 2015, 18:12:36 »
It won't be a bolt on job. The pipe will have to be welded on and I'm not sure there is provision for exhaust rubber on LHS.
Then there is the question of where will the tips fit?
  • 2018 I30-SR. 2002 Tiburon. 2000 Wrangler.

Re: exhaust
« Reply #2 : February 06, 2015, 10:27:27 »
Yep new bracket has to be welded on the LHS ive decided to have one made because its a pain in the ass to get it here from korea started this mod today but as long as it is done right it should look good its not a performance mod as it is a diesel its totally cosmetic.will post some pics when it is all done  :victory:
  • hyundai i30 2008 crdi

  • *
  • Laughter is the best medicine. .
  • Posts: 65,281
  • au Australia
    Devonport Tasmania
  • Best Car Forum on the Net
Re: exhaust
« Reply #3 : February 06, 2015, 16:39:42 »
Yep new bracket has to be welded on the LHS ive decided to have one made because its a pain in the ass to get it here from korea started this mod today but as long as it is done right it should look good its not a performance mod as it is a diesel its totally cosmetic.will post some pics when it is all done  :victory:

Sounds good (well I hope it does) Look forward to more info and pictures!  :goodjob:
  • '19 Hybrid Camry & '19 Kona Active 1.6 (Prev had four i30's incl SR and CRDi)

Re: exhaust
« Reply #4 : February 07, 2015, 07:17:59 »
https://www.dropbox.com/s/jpat51c2gzesxs8/20150207_135501.jpg?dl=0

Right  then all done dont look that bad no real change  in exhaust note but it is a diesel this was done just for the look .took me 4 hrs to do bit of a git to put LHS bracket on  as it was really close to fuel line but took my time and had a fire extinguisher at the ready just in case LOL and covered lines in tinfoil well it worked while i was welding



  • hyundai i30 2008 crdi

  • *
  • Posts: 3,210
  • au Australia
    Grafton, NSW
  • Crooked-H Hero
Re: exhaust
« Reply #5 : February 07, 2015, 07:34:15 »
Very good
  • 2018 I30-SR. 2002 Tiburon. 2000 Wrangler.

  • *
  • i40 CRDi 100kW 2013
  • Posts: 4,434
  • dk Denmark
    Sdr. Omme - DK
Re: exhaust
« Reply #6 : February 07, 2015, 12:07:25 »
Looking good with that new exhaust, jesam..  :goodjob2: :goodjob2:
  • i40 CRDi 100 kW 2013

Re: exhaust
« Reply #7 : February 07, 2015, 12:22:03 »
Thanks asterix .i can tick that one off the list just waiting for some more parts to arrive   :victory:
  • hyundai i30 2008 crdi

  • *
  • Posts: 782
  • gb United Kingdom
    Bolton, Lancashire
Re: exhaust
« Reply #8 : February 07, 2015, 12:42:56 »
Looks Good :goodjob2: :goodjob:
  • 2013 5D 1.6 CRDi Style Nav auto white

  • *
  • Laughter is the best medicine. .
  • Posts: 65,281
  • au Australia
    Devonport Tasmania
  • Best Car Forum on the Net
Re: exhaust
« Reply #9 : February 07, 2015, 16:01:09 »
 :wts: Any chance of some under car shots?
  • '19 Hybrid Camry & '19 Kona Active 1.6 (Prev had four i30's incl SR and CRDi)

  • *
  • Loco, most of the time!
  • Posts: 21,980
  • au Australia
    Mos Eisley, South Australia
Re: exhaust
« Reply #10 : February 07, 2015, 19:59:19 »
Did you use a bituminous compound to protect the floor after welding. Need to stop rust weakening your bracket. Looks good.
  • 2008 SX CRDi Auto White (Lila)
    2010 SLX CRDi Auto Red (Ruby)

Re: exhaust
« Reply #11 : February 08, 2015, 11:58:46 »
Little up date well happy with this look but going to take off and fabricate in stainless steel now that i have all the correct measurements should take me about a week as i do have to work as well when i am all done i will take some detailed photos for any one thats interested  :victory:
  • hyundai i30 2008 crdi

  • *
  • Posts: 9,970
  • au Australia
    Perth
Re: exhaust
« Reply #12 : February 08, 2015, 12:08:38 »
Are you converting the whole exhaust to stainless or just the rear section you have replaced?

Re: exhaust
« Reply #13 : February 08, 2015, 12:12:43 »
Just the back like the one in my first post on this page catback system
  • hyundai i30 2008 crdi

  • *
  • Posts: 9,970
  • au Australia
    Perth
Re: exhaust
« Reply #14 : February 08, 2015, 12:22:46 »
Is it worth the effort if only changing the rear, it's not something that people are under the car admiring unless you are planning on a show car and you have the chrome tips which is all anyone will ever see.

You'd get more benefit spending money upgrading the catalytic converter and muffler to free flowing imo.

Re: exhaust
« Reply #15 : February 08, 2015, 12:37:52 »
Yeh i was kinda thinking the same thing i might build up to the cat like the koreanautoimports.com one  :sweating:
  • hyundai i30 2008 crdi

  • *
  • Posts: 9,970
  • au Australia
    Perth
Re: exhaust
« Reply #16 : February 08, 2015, 13:17:52 »
That sounds like a plan, at least you/car should get a slight benefit in performance other than just aesthetics :goodjob2:

  • *
  • Laughter is the best medicine. .
  • Posts: 65,281
  • au Australia
    Devonport Tasmania
  • Best Car Forum on the Net
Re: exhaust
« Reply #17 : February 08, 2015, 18:13:38 »
 :whsaid: And you can always replace it with a stainless one in a few years if you keep the car long term and this one deteriorates.
  • '19 Hybrid Camry & '19 Kona Active 1.6 (Prev had four i30's incl SR and CRDi)

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal