Author Topic: Number plate bulb holder  (Read 250 times)

0 Members and 1 Guest are viewing this topic.

  • *
  • Posts: 12
  • gb United Kingdom
Number plate bulb holder
« March 11, 2019, 05:40:07 »
Hi everyone,

My 2011 i30 CW is coming up for its MOT in a few weeks. However, at some point in the past year or so, the plastic cover for one of the rear number plate (licence plate for future search purposes!) has come off, and taken the bulb off.

Does anyone happen to know a part number for this? I need to get it ordered and fitted in the next fortnight, and the local dealer quoted 150!!



  • 2011 FD 5 Door Estate, Diesel 1.6lt, White

  • *
  • Posts: 3,182
  • au Australia
    Ipswich
Re: Number plate bulb holder
« Reply #1 : March 11, 2019, 05:51:38 »
Hi everyone,

My 2011 i30 CW is coming up for its MOT in a few weeks. However, at some point in the past year or so, the plastic cover for one of the rear number plate (licence plate for future search purposes!) has come off, and taken the bulb off.

Does anyone happen to know a part number for this? I need to get it ordered and fitted in the next fortnight, and the local dealer quoted 150!!
Is that for the parts only or fitted as well? Not sure what your plan is but 2 weeks is not a very long time .

Wrecking yards?
  • 2008 i30 SLX CRDi Auto, 2010 i30CW SLX CRDi Auto. 2008 i30 CRDi SX manual, Welly

  • *
  • Posts: 3,182
  • au Australia
    Ipswich
Re: Number plate bulb holder
« Reply #2 : March 11, 2019, 06:12:31 »
Is this what you're after? 15mins it took me to find this  :head_butt:

92501-2L100



looks like the hatch release is an integral part of the harness as well?

Korea to UK? Have you ever ordered from Korea before?

How strict is MOT? Can clear tape be placed to hold it until parts arrive?

Why did you not get the part number when you were at the dealer?

:link: ELANTRA TOURING 08- i30 i30CW 07- GENUINE LICENSE PLATE LAMP 925012L100 | eBay



« Last Edit: March 11, 2019, 06:26:54 by tw2005 » »
  • 2008 i30 SLX CRDi Auto, 2010 i30CW SLX CRDi Auto. 2008 i30 CRDi SX manual, Welly

Re: Number plate bulb holder
« Reply #3 : March 11, 2019, 06:29:17 »
Thanks for that. What search term did you use out of interest? I just kept getting bulbs instead of the holder.

I still have some of the bits, I might try some Sugru to get it through the MOT. I'll need to get out and check the bulb still works. I damaged the interior boot card a while ago so I might replace that at the same time, and maybe even stick some sound deadening on the boot lid at the same time.

I didn't get the part number because my other half (in reality the car is hers) picked the car up.

  • 2011 FD 5 Door Estate, Diesel 1.6lt, White

  • *
  • Posts: 3,182
  • au Australia
    Ipswich
Re: Number plate bulb holder
« Reply #4 : March 11, 2019, 06:39:21 »
Thanks for that. What search term did you use out of interest? I just kept getting bulbs instead of the holder.

I still have some of the bits, I might try some Sugru to get it through the MOT. I'll need to get out and check the bulb still works. I damaged the interior boot card a while ago so I might replace that at the same time, and maybe even stick some sound deadening on the boot lid at the same time.

I didn't get the part number because my other half (in reality the car is hers) picked the car up.
Of course, she who must be obeyed. Search term? if you're thinking google, good luck, that would be tricky. Hyundai parts catalog but finding it in that was a challenge. Ended up using "lamp" as a keyword to dig out all the "lamps" on the friggin car.

Yes, glue may be a good temp until te new one arrives. The hatch has similar issue where the plastic clips go hard and brittle, crack and hangs out the bumper. They have to be unclipped to replace the bulb, and that's when they are likely to crack.
Better plastics or design would help. Bit on the cheap side.

SO I guess the 150 was the part only?
  • 2008 i30 SLX CRDi Auto, 2010 i30CW SLX CRDi Auto. 2008 i30 CRDi SX manual, Welly

  • *
  • Posts: 3,182
  • au Australia
    Ipswich
Re: Number plate bulb holder
« Reply #5 : March 11, 2019, 06:45:05 »
Just noticed the lens can ordered (maybe) Koraps don't list it.

92510-3F000

  • 2008 i30 SLX CRDi Auto, 2010 i30CW SLX CRDi Auto. 2008 i30 CRDi SX manual, Welly

Re: Number plate bulb holder
« Reply #6 : March 11, 2019, 08:04:21 »
Of course, she who must be obeyed. Search term? if you're thinking google, good luck, that would be tricky. Hyundai parts catalog but finding it in that was a challenge. Ended up using "lamp" as a keyword to dig out all the "lamps" on the friggin car.

Yes, glue may be a good temp until te new one arrives. The hatch has similar issue where the plastic clips go hard and brittle, crack and hangs out the bumper. They have to be unclipped to replace the bulb, and that's when they are likely to crack.
Better plastics or design would help. Bit on the cheap side.

SO I guess the 150 was the part only?

I think that might be it fitted. I don't have access to the parts catalogue (unless it's readily available!) so I was using Google, hence my question!
  • 2011 FD 5 Door Estate, Diesel 1.6lt, White

 


anything