[mrendu43]

Hello. i have hyundai i30 GD 1.4 petrol.
Mine dont have remote lock, just central lock on both driver and passanger doors.
i purchused universal remote locking kit.
Can anyione help me hot to connect this remote module to my system?
Anyone have diagram for central locking, and know whare can i fine original central locking module to hook up this one to.

Tnak you and sorry for my bad english

[mrendu43]

Here is truth table from driver side doors, if anyone can make sense of this.

[The Gonz]

That table just specifies under which conditions each wire has voltage. With some thought you should be able to make the right connections.

You won't get much response if you don't provide a link to what you bought.

[mrendu43]

Yes you are right. im sorry about that.
here is link for remote locking unit i have
universal vehicle central locking kit & car alarm system with immobiliser shock sensor Sale - Banggood.com.

also, thare i picture of wiering diagram.

[The Gonz]

I presume the 'Central Lock Diagram' is the information you seek. Someone here familiar with the GD model or with a wiring diagram collection, maybe @tw2005, may have already posted the schematic you need. If you have that it could be simple enough to just match colours one by one from the loom in the i30.

Have you tried using the search function on this site using words like central locking wiring? I'll try now and post again.

[mrendu43]

yes i tryed serching diagram here, but only fond this...

[The Gonz]

I admit you found more than I did but I can't read that. Do you have the link?

[tw2005]

got no idea if this is correct, for GDe model, 1.4.







I was thinking if it's simply possible to get the BCM with the remote feature. Only catch maybe the alarm and the sensors it would need.

no antenna 95400a6000


remote and alarm
95400a6010

[mrendu43]

Thank you very much.
it could be that, the colors of the wires match, the colors inside the driver's door, and also my truth table match.
I think i can figure out how to connect remote with this diagram.


Thank you one more time

[mrendu43]

Thank you agin, i menaged to connect my remote kit to central locking and it works.
it was just matter of figuring ot how to connect signals to relays, because thare is sequance for signals.
if you look on diagram thare is key lock and key unlock wires, orange and yellow, but it wil not work only pulling them to gnd. for unlock you need to pull brown and orange simultaneusly to gnd and also for locking you need to pull yellow to ground and disconnect brown from ground.

[Dazzler]

 

[The Gonz]

Good job.
Another happy ending of which you are so fond, Dazz.

[Dazzler]

Good job.
Another happy ending of which you are so fond, Dazz.

Yep. They always make me smile.