Author Topic: ECU FLASH - Very Slow at flashing tune (i30 SR)  (Read 124 times)

0 Members and 1 Guest are viewing this topic.

  • *
  • Posts: 2
  • au Australia
    Queensland
ECU FLASH - Very Slow at flashing tune (i30 SR)
« November 02, 2019, 02:47:15 »
Hi everyone,

I was wondering if anyone has flashed a tune via the OBD port on an i30 SR and what speeds they were getting.
I am using an openport 2.0 with a Tactrix cable. The software I am using is PCM Flash, when I flash the car it is really slow and seems to be unsuccessful many times just due to the speed of it.
Any ideas what I should try?
Thanks


  • 2018 i30 SR

  • *
  • Posts: 9,777
  • au Australia
    Perth
Re: ECU FLASH - Very Slow at flashing tune (i30 SR)
« Reply #1 : November 02, 2019, 03:08:02 »
I wasn't aware that they were able to be flashed via the OBD port :undecided: ECU out job for mine when I had it done to get by the security restrictions though that was some years ago now.

If they are update compatible the speed would be dependent on the CPU speed at either end : Computer - ECU, and of course the software itself.

  • *
  • Author
  • Posts: 2
  • au Australia
    Queensland
Re: ECU FLASH - Very Slow at flashing tune (i30 SR)
« Reply #2 : November 02, 2019, 04:33:27 »
Must be the new models only then?
  • 2018 i30 SR