Author Topic: How to mute the A-200fde stock radio when using Bury carkit?  (Read 275 times)

0 Members and 1 Guest are viewing this topic.

  • *
  • Posts: 1
  • nl Netherlands
Hi, I'm new here, i own a nice i30 i-catcher hatchback 2.0 litres from 2009.

I have installed a Bury system 8 Take n Talk carkit. Only thing I wonder is how to mute the stock radio A-200fde. There is very less information about the radio (wiring diagram??) , but I was assuming -found by Google- that a pin in the C1 (number 5) section of the DIN connector was dedicated  to connect with the yellow "mute" wire from the Bury. Unfortunaly it did'nt work....
Does someone know if the radio supports muting, and if so, witch pin I have to use?

Sorry for my poor English....

Best regards, and thanx in advance fro the help!


« Last Edit: November 09, 2019, 03:52:40 by schenzel » »

  • 2009 5 Door Hatch, Petrol 2lt, 5 gear, black

  • *
  • Laughter is the best medicine. .
  • Posts: 65,949
  • au Australia
    Devonport Tasmania
  • Best Car Forum on the Net
Re: How to mute the A-200fde stock radio when using Bury carkit?
« Reply #1 : November 10, 2019, 04:56:14 »
Welcome, your English is fine. Sorry nobody has been able to help so far.  :undecided:
  • '19 Hybrid Camry & '19 Kona Active 1.6 (Prev had four i30's incl SR and CRDi)


SimplePortal 2.3.5 © 2008-2012, SimplePortal