Author Topic: Constant and Accessory Fuse Help - PD i30 SR Premium  (Read 318 times)

0 Members and 1 Guest are viewing this topic.

  • *
  • Posts: 51
Constant and Accessory Fuse Help - PD i30 SR Premium
« January 04, 2021, 17:52:32 »
Hi all,

I am installing a dash camera and will be hardwiring using a supplied 3 wire hardwiring kit with fuse taps.

Just wondering what fuses others have tapped into for constant, accessory and a suitable ground location.

Cheers



  • *
  • Posts: 10,634
  • au Australia
    Perth, WA
Re: Constant and Accessory Fuse Help - PD i30 SR Premium
« Reply #1 : January 05, 2021, 01:57:10 »
The interior light fuse has constant feed, I wasn't prepared to risk shortening the vehicles battery life so went with a dashcam battery pack :link: BlackVue B-124X Battery Dash Cam Pack | DASH CAMS AUSTRALIA

Battery is hard wired to the 25Amp wiper fuse (not constant) which feeds/charges the battery when the vehicle is running and when parked the battery pack feeds the camera.

On my GD there is a ground location screw that can be used just above the drivers kick panel, and another if you open the drivers door and remove the dash end/side panel.

  • *
  • Posts: 718
  • fi Finland
    Helsinki
Re: Constant and Accessory Fuse Help - PD i30 SR Premium
« Reply #2 : January 08, 2021, 03:37:40 »
In FD I took the dashcam power from foglight fuse. It was in fuse box next to drivers door. No risk running battery out and easy place to take powerwire inside A pillar seal up and inside headliner to to dashcam.
  • i30 cw 1.6crdi -08

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal